APEX ONLINE GUIDE

TABLE OF CONTENTS

HYDROLINK USER INTERFACE

INTERFACE

FUNCTION

WI-FI Button

Press to enter network configuration

LED Light

Indicates if Wi-Fi connection is successful or not

CONNECTING HYDROLINK

Connect cable to HydroLink
  1. Align the notch on the 4-pin connector end of the 2.2-meter power cable with the DynaSkimmer.
  2. Rotate the connector clockwise to ensure a secure connection.
Connect cable to Apex A1
  1. Align the notch on the 5-pin connector end of the 2.2-meter floating power cable to the robotic pool cleaner.
  2. Rotate the connector clockwise to ensure a secure connection.

WARNING

  • Ensure all caps are fully screwed in place without any gaps.
  • Avoid twisting the entire power cord to prevent damage.
  • To prevent water exposure to the power cable connector pins, ensure the connector is fully screwed in place without any gaps.

WI-FI CONFIGURATION USING HYDROLINK

Power on Apex A1
  1. Place the robot on a flat surface on land.
  2. Press the POWER BUTTON to power on.
Enter network configuration mode
  1. Press and hold WI-FI button for 3 seconds.
  2. The indicator light will start to flash.
Pair device
  1. On your mobile phone, turn on Bluetooth and open the app Smart Life.
  2. Select “Add Device” to start network configuration.
  3. After the network configuration is completed, HydroLink’s light indicator light will remain steady.